Informations sur fdfggg123 |
Inscrit le : |
02-09-2019 |
Dernière visite |
02-09-2019, 3:54 |
Nombre total de messages : |
0 (0 messages par jour | 0 pourcent du nombre total de messages) |
Nombre total de sujets : |
0 (0 sujets par jour | 0 pourcent du nombre total de sujets) |
Temps passé en ligne : |
1 Minute, 32 Secondes |
|
|
Informations additionnelles à propos de fdfggg123 |
Sex: |
Undisclosed |
Bio: |
HNF-250
Rated load: 25,000 kgs
Load center: 900 mm
Operating weight: 35,000 kgs
Wheel base: 4,000 mm
1, adopt double pump confluence working hydraulic system, greatly reduce fuel consumption, energy consumption. Hydraulic system equipped with oil radiator and back pressure protection device, ensure the machine heat balance
2, use Hangchi, Sanchi planet type hydraulic power shift transmission, big traction in combined operating condition, the transmission system more reliable.
3, using speed limit valve and pressure selector valve, reduce the hydraulic system impact, can lower the mast to the ground when engine flame out
4, cooperate with hercynian institute of Chinese Academy of Sciences "overall structure optimization scheme", verifies the stiffness and strength calculation, fatigue life forecast on the forklift, comprehensive finite element mechanics analysis, structure design optimization, ensure the security of the products use
Forklift maintenance 2
1、Inspect leakage condition, emphasis are connectors of all tubes, which are located in fuel tank, oil tank,brake pump,lift and fall down oil cylinder, tilt oil cylinder, steering oil cylinder,side shift oil cylinder, water tank, water pump, engine oil pan, torque converter,drive axle, main reducing gear, hydraulic steering gear.
2、Inspect air pressure of tyre, please supplement it to specified value if not enough, confirm air tight. Check the bottom and side of tyre whether have damaged, whether rim distorted.
ItemItem detailsUnit
HNF-280
FeaturesRated LoadQ(t)28
Load centerc(mm)1250
Wheelbasey(mm)4800
WeightWeightkg40000
ChassisTyre Specs.:Front
14.00-24-32PR
Tyre Specs.:Rear
14.00-24-32PR
Tyres Qty,front/rear(X-drive wheels)
4\2
Wheel tread:Frontb10(mm)2420
Wheel tread:Rearb11(mm)2390
DimensionMast/carriage tilt angle(front/rear)Degree(°)6\12
Mast height(fork lowering)h1(mm)3950
Mast lifting heighth3(mm)3500
Max.lifting heighth4(mm)5700
Height to head guard(height to cab)h6(mm)3800
Overall height(with forks)l1(mm)9590
Fork front vertical surface to the rear end of the vehiclel2(mm)7150
Overall widthb1/b2(mm)3200
Fork dimensions/e(mm)2440X320X110
Fork carriage widthb3(mm)3100
Mast min ground clearance (with load)m1(mm)350
Wheelbase center min ground clearance(with load)m2(mm)410
Min.Turning radiusWa(mm)7260
Travel speed(with load/without load)km/h24/28
PerformanceMax.lifting speed(with load/without load)mm/s260/280
Max.Lowering speed(with load/without load)mm/s250/180
TractionN22000
Gradeablity(with load/without load)%20/21
Driving brake
Hydraulic clamp disc
Engine brand/modelOptional oneWeichai engine
Engine
WO10G240E341
9.726L 178KW 2200rpm
Optional twoDongfeng Cummins
QSC8.3-C260
8.3L 194KW 2200rpm
Cylinder No.6
OthersTransmission gears(Front/rear)
2\1
Attachments working pressurebar180
Attachments using oil amountl/min80
Customized Heavy Duty Forklift
website:http://www.socma-forklift.com/heavy-duty-forklift/ |
|